Introduction

This project aims to give a simple overview on how good various x64 hooking engines (on windows) are. I’ll try to write various functions, that are hard to patch and then see how each hooking engine does.

I’ll test:

• EasyHook
• PolyHook
• MinHook
• Mhook

(I’d like to test detours, but I’m not willing to pay for it. So that isn’t tested :( )

There are multiple things that make hooking difficult. Maybe you want to patch while the application is running -- in that case you might get race conditions, as the application is executing your half finished hook. Maybe the software has some self protection features (or other software on the system provides that, e.g. Trustee Rapport)

Evaluating how the hooking engines stack up against that is not the goal here. Neither are non-functional criteria, like how fast it is or how much memory it needs for each hook. This is just about the challenges the function to be hooked itself poses.

Namely:

• Are jumps relocated?
• What about RIP adressing?
• If there’s a loop at the beginning / if it’s a tail recurisve function, does the hooking engine handle it?
• How good is the dissassembler, how many instructions does it know?
• Can it hook already hooked functions?

At first I will give a short walk through of the architecture, then quickly go over the test cases. After that come the results and an evaluation for each engine.

I think I found a flaw in all of them; I’ll publish a small POC which should at least detect the existence of problematic code.

A word of caution: my results are worse than expected, so do assume I have made a mistake in using the libraries. I went into this expecting that some engines at least would try to detect e.g. the loops back into the first few bytes. But none did? That’s gotta be wrong.

Another word of caution: parts of this are rushed and/or ugly. Please double check parts that seem suspicious. And I’d love to get patches, even for the most trivial things -- spelling mistakes? Yes please.

Architecture

This project is made up of two parts. A .DLL with the test cases and an .exe that hooks those, tests whether they still work and prints the results.

(I could have done it all in the .exe but this makes it trivial to (at some point) force the function to be hooked and the target function to be further apart than 2GB. Just set fixed image bases in the project settings and you’re done)

My main concern was automatically identifying whether the hook worked. I consider a hook to work if: a) the original function can still execute successfully and b) the hook was called.

The criteria a) is really similar to a unit test. Verify that a function returns what is expected. So for a) the .exe just runs unit tests after all the hooks have been applied. Each failing function is reported (or the program crashes and I can look at the callstack) so I can correlate that with which hooking engine I’m currently testing and see where those fail. I’ve used Catch2 for the unit tests, because I wanted to try it anyway.

From the get-to it was clear that I wanted to test multiple hooking engines. And they all needed to do the same steps in the same order -- so I implemented a basic AbstractHookingEngine with a boolean for every test case and make a child class for each engine. The children classes have to overwrite hook_all and unhook_all. Inbetween the calls to that, the unit tests run.

Test case: Small

This is just a very small function; it is smaller than the hook code will be - so how does the library react?

_small:
	xor eax, eax
	ret

Test case: Branch

Instead of the FASM code I’ll show the disassembled version, so you can see the instruction lengths & offsets.

0026 | 48 83 E0 01 | and rax,1
002A | 74 17       | je test_cases.0043 ----+
002C | 48 31 C0    | xor rax,rax            |
002F | 90          | nop                    |
0030 | 90          | nop                    |
0031 | 90          | nop                    |
0032 | 90          | nop                    |
0033 | 90          | nop                    |
0034 | 90          | nop                    |
0035 | 90          | nop                    |
0036 | 90          | nop                    |
0037 | 90          | nop                    |
0038 | 90          | nop                    |
0039 | 90          | nop                    |
003A | 90          | nop                    |
003B | 90          | nop                    |
003C | 90          | nop                    |
003D | 90          | nop                    |
003E | 90          | nop                    |
003F | 90          | nop                    |
0040 | 90          | nop                    |
0041 | 90          | nop                    |
0042 | 90          | nop                    |
0043 | C3          | ret  <-----------------+

This function has a branch in the first 5 bytes. Hooking it detour-style isn’t possible without fixing that branch in the trampoline. The NOP sled is just so the hooking engine can’t cheat and just put the whole function into the trampoline. Instead the jump in the trampoline needs to be modified so it jumps back to the original destinations

Test case: RIP relative

XXX TODO XXX

Test case: AVX & RDRAND

The AMD64 instruction set is extended with every CPU generation. Becayse the hooking engines need to know the instruction lengths and their side effects to properly apply their hooks, they need to keep up.

The actual code in the test case is boring and doesn’t matter. I’m sure there are disagreements on whether I’ve picked good candidates of “exotic” or new instructions, but those were the first that came to mind.

(Preliminary) Results

+----------+-----+------+------------+---+------+----+-------+ | Name|Small|Branch|RIP Relative|AVX|RDRAND|Loop|TailRec| +----------+-----+------+------------+---+------+----+-------+ | PolyHook| X | X | X | X | | | | | MinHook| X | X | X | | | | X | | MHook| | | X | | | | | +----------+-----+------+------------+---+------+----+-------+